Feature(may vary by option.)
●Fibre seal DN8 3/8 inch, material: rear centelles HD 3822
●Thickness: approx. 2 mm, interior: approx. 7.5 mm, outside: approx. 14 mm, maximum pressure: 40 bar
●Temperature range up to 220 °C, for screw connections with flat seat
●Approvals: according to KTW for drinking water and for gas supply
●Seal quantity: 10, 15, 20 or 25 pieces
[25]
[15]
[20]
[10]
Description
Flat seal 3/8 inch with drinking water approval for sanitary and heating.
As a high-quality Hecker Centellen fibre seal, it can be used in a wide range of areas. On the one hand, it allows the drinking water approval that it can be used, for example, for a food hose in industry or in research. Therefore, it is also possible to use in vapours, hydrocarbons, alcohols or acids.
Whether drinking water range or mechanical engineering, sanitary, solar or heating construction, the high-quality properties of the flat seal 3/8 inch allow the seal to be applied at temperatures up to 250 °C or even at higher pressures up to 150 bar.
- Type: fibre seal 3/8 inch.
- Nominal width: DN8.
- Material: Hecker Centellen HD 3822.
- Thickness: approx. 2 mm.
- Inner diameter: approx. 7.5 mm.
- Outer diameter: approx. 14 mm.
- Pressure: 40 bar.
- Temperature range: up to 220 °C.
- Approvals: KTW for drinking water and gas supply, TA Air, DVGW & BAM
- For screw connections with flat seat.
- Standard packs: 10 / 15 / 20 & 25 pieces / other sizes available on request