[Ø 68 mm & 82 mm]
[ø 68 mm]
The diamond can countersink with a diameter of 68 mm and 4 titanium W segments is especially suitable for drilling hard sand-lime brick (quardro-lime sandstone).
Application:
Hard sand-lime brick (quardro-lime sandstone). Gross density 2.0-3.0.
Hard building materials.
Clinker brick
Details:
Diameter: 68 mm.
Number of segments: 4 titanium W segments.
Segment height: 9 mm.
Usable length: 70 mm.
The usable length is given until the entire wear of the segments.
The socket countersink has extra wide ejection slots, which allow optimised removal through the dust extraction of the accumulated drill dust.
Due to the improved removal of the drill dust, fast drilling progress is guaranteed. Another advantage is the better cooling of the segment and thus the lower load of the socket countersinker.
The socket countersink is particularly used in the electrical industry for switch and junction boxes.
The optimal speed of rotation for soft building materials is 1,600-2,000 min-1 and for hard building materials is 1,000 - 1,600 min-1.
Abrasive building materials must be drilled with at least 1,600 turns. Otherwise, a very high wear of the diamond segments will be threatened.
When used on too weak drills with too low rotation speed, there are problems when countersinking.
The diamond socket drill must only be used without impact function, otherwise the segments are threatened.