[1 M14 to HEX]
[2 M14 to HEX]
NBB vacuum brazed (VB) diamond drill bits are professionally made for wet or dry drilling in all types of ceramic, porcelain, tile, granite, marble, sandstone and other hard materials.
Thanks to the VB technology, diamond drills can drill wet or dry on hard porcelain and stone with greater efficiency and longer service life.
NBB VB diamond drill bits with M14 thread connection can be used directly on the angle grinder.
Easy to use, applied for dry and wet drilling, can work in all conditions. The perfect tools are at your fingertips.
With the NBB VB diamond cutter, you can drill the necessary holes for water inlets, evacuations, light points, etc.
NBB VB diamond drill can dry drill dozens of holes in hard porcelain, much longer service life than galvanized (almost 8 times). When wet, you can drill much more holes.
For diameter 6-16 mm, the total length is approx. 62 mm at 35 mm drilling depth. For a diameter of 18-150 mm, the total length is approx. 65 mm at 40 mm drilling depth.
NBB VB diamond drill bits (diameter 6-16mm) have special cold wax inside to ensure proper dry drilling and stable performance.
1. Do not use the hammer mode of the machine.
2. Before each drilling, make sure the drill is installed firmly and vibration-free on the machine.
3. The diamond drill should be clean and free from obstacles.
4. When drilling the hole, you only need to apply light pressure.
|
|
|
|
---|---|---|---|
High-quality diamond and vacuum soldering technology of the new generationHigh Quality Diamond Coating On The Outside Of The NBB Diamond Drill. High quality diamonds last longer and are more aggressive. This makes the NBR diamond drill work longer and more efficiently. And it makes it possible for anyone (professional user or DIY enthusiast) to make a beautiful hole in an easy way. Benefit from the new generation of soldering processes, NBB diamond drill bits can drill hard porcelain, ceramics, tiles, granite, marble and artificial stone dry or wet. |
Used for wired or wireless angle grindersUsed for wired and wireless angle grinders. To use the cordless angle grinder, make sure that the battery is sufficiently charged. Otherwise, the low power may affect the life of the diamond drill. Based on our experience, we recommend using the fully charged battery for good performance. Please replace the battery in time before the battery is empty. As a low battery leads to insufficient power of the machine, which affects the life of the drill. |
Recommended speedRecommended speed from 11,000 to 14,000 RPM. We always recommend using a high speed to make a beautiful hole. Low RPM causes low drilling efficiency and produce high heat that can damage the diamond and affect the life of the drill. |
Used in dry or wet conditionsNBB VB diamond drill bits (diameter 6-16mm) have special cold wax inside to ensure proper dry drilling and stable performance. NBB VB diamond drill bits (diameter 18-150mm) have a side opening that improves the cooling of the drill and makes it easier to remove solid residue after each drill. Benefit from NBB VB diamond drill bits can be used in dry or wet conditions. And you can drill more holes when wet (in better cooling condition). |
In order to achieve a better working experience and longer life of NBR diamond drills, we recommend installing the tools with the right method, which is basic but very important.
Make sure the diamond hole saw NBB VB is firmly screwed into the M14 thread and the flange cannot move.
If there is wax overfilling inside, please screw it in with a wrench, even if the overfilling is pushed out!
In order to achieve a better working experience and longer life of NBR diamond drills, we recommend installing the tools with the right method, which is basic but very important.
Make sure the diamond hole saw NBB VB is firmly screwed into the M14 thread and the flange cannot move.
If there is wax overfilling inside, please screw it in with a wrench, even if the overfilling is pushed out!
In order to achieve a better working experience and longer life of NBR diamond drills, we recommend installing the tools with the right method, which is basic but very important.
Make sure the diamond hole saw NBB VB is firmly screwed into the M14 thread and the flange cannot move.
If there is wax overfilling inside, please screw it in with a wrench, even if the overfilling is pushed out!
In order to achieve a better working experience and longer life of NBR diamond drills, we recommend installing the tools with the right method, which is basic but very important.
Make sure the diamond hole saw NBB VB is firmly screwed into the M14 thread and the flange cannot move.
If there is wax overfilling inside, please screw it in with a wrench, even if the overfilling is pushed out!
|
|
|
---|---|---|
INSTALLATIONMake sure that the diamond drill NBB VB is firmly screwed into the M14 thread and the flange cannot move. If there is crowded wax inside, please use a wrench to screw it in, even if the crowded wax is squeezed and comes out! |
FIRST AND SECOND STEPFirst step: Create a guide at the site At the beginning, please approx. 10° - 45° tilt to start drilling. It helps to drill a flat groove that can be used as a guide. Second step: Drill the hole vertically After making the flat groove, you can drill the hole vertically. The flat groove can help you prevent the drill bits from slipping when drilling and determine the position. We recommend that you swing the machine slightly so that the stone flour can be easily removed. It can prevent the powder from getting stuck in the hole and generate high heat. In this way, the life of the diamond drill bit NBB VB is extended. |
THIRD STEPThird step: Drilling and swinging When drilling holes, always swivel the machine slightly. To make NBB VB diamond drill last longer, please follow the correct instructions on the method of use. 1. Do not use the hammer mode of the machine. 2. Before drilling again, we must ensure that the drill is installed properly and firmly on the machine without vibration. 3. The drill must be clean and free from obstacles. 4. When drilling, you only need to apply light pressure (the pressure of the machine weight is sufficient in the vertical direction). |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|---|
NBB VB PROFESSIONAL DIAMOND HOLE SAW | NBB VB ULTRA DIAMOND HOLE SAW | NBB VB Classic Diamond Hole Saw | NBB VB Shiny Red Diamond Hole Saw | NBB VB Extra Long Diamond Hole Saw | NBB VB diamond barrel cutter | |
Customer Reviews |
4.3 out of 5 stars
839
|
3.8 out of 5 stars
13
|
— |
4.5 out of 5 stars
122
|
4.8 out of 5 stars
7
|
4.4 out of 5 stars
41
|
Price | €15.99€15.99 | €21.20€21.20 | — | €18.58€18.58 | €22.54€22.54 | €21.49€21.49 |
M14 connector | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Total length: | 60 mm | 60 mm | 65 mm | 65 mm | 90 mm | 43 mm |
Drilling depth | 35 mm | 35 mm | 40 mm | 45 mm | 65 mm | 32 mm |
Thickness with diamond coating | 3.2 mm | 3.2 mm | 2.5 mm | 2.8 mm | 2 mm | |
Features: | Long service life, fast drilling and low vibration | Longer service life, fast drilling and low vibration | Long life and faster drilling | Long life and faster drilling | Longer life, faster drilling and lower vibration |