Feature

●Industrial quality: the PFERD countersinks allow countersinking and deburring when working with different materials, even in industrial environments
●Universal: HSS countersinks from PFERD can be used universally on almost all materials
●Powerful: the high-performance countersinking tools impress with a very high removal rate, optimal chip removal and long service life
●Free: Three cutters are characterised by their particularly sharp, right-hand cutting edges, which achieve very good, burr-free results even at low cutting speeds
●Box contents: 1 x PFERD countersink set, consisting of: 3 x countersinks, with diameter 6.3/10.4/16.5 mm and countersink angle 90°, design HSS


Description

class="celwidget pd_rd_w-iCOBU pd_rd_r-GR0WY4E4T4YGY4CVJHCZ pd_rd_wg-keUzQ" data-feature-name="aplus" data-csa-c-type="widget" data-csa-c-content-id="aplus" data-csa-c-slot-id="aplus_feature_div" data-csa-c-asin="" data-csa-c-is-in-initial-active-row="false" data-csa-c-id="9b2qac-yadmv2-4fg3v-mfey7d" data-cel-widget="aplus_feature_div">

From the manufacturer

Graphic tapeGraphic tape

Pferd - quality since 1799

With over 8,500 tools for surface processing and separation of materials, Pferd offers the optimal tool solution for every application.

Drill combination imageDrill combination image

CountersinkCountersink
HSS countersink 90°

Particularly suitable for making countersinks for 90° screws.

Workable materials:

  • steel
  • Cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
  • Plastics
  • Other materials

Countersinking tools

HSS cone / deburring countersink

Countersink from Pferd are characterised by their particularly sharp, right-hand cutting edges, which achieve very good results even at low cutting speeds. The different designs allow for countersinking and deburring when processing different materials, even in industrial environments.

Advantages:

  • Very high removal rate and optimal chip removal.
  • Burr-free results even at low cutting speeds.
  • Long service life.
  • High surface quality of the workpiece.

Finishes:

HSSG steelHSSG steel

HSSE INOXHSSE INOX

SetsSets

HSS DIN 335 C 90°

High-performance countersink tools with a countersunk angle of 90° for countersinking 90° screws for all common materials such as steel, cast steel and non-ferrous metals.

HSS countersink that can be used universally on almost all materials.

HSS-E DIN 335 C 90°, design Co5

High-performance countersink tools with a countersunk angle of 90° for countersinking 90° screws for particularly tough and hard materials such as alloy and high-strength steel and stainless steel (INOX). Long service life and temperature-resistant design thanks to co-content.

Universal use on almost all materials. Long service life. Very good temperature resistance due to co-content.

HSS DIN 335 C 90° with HC-FEP HICOAT coating

High-performance countersink tools with a countersunk angle of 90° for countersinking 90° screws for particularly tough and hard materials such as alloy and high-strength steel and stainless steel. Thanks to the HC-FEP HICOAT coating, they have a high hardness and wear resistance. They are very temperature resistant and have a particularly long service life.

Universal use on almost all materials. Very long service life. Can also be used in the higher cutting speed range and without cooling and lubricants.

AWE drill bitsAWE drill bits

Recommended use:

Choose the appropriate design depending on the required angle and material to be processed. Use as coolant/lubricant cutting oil or Compressed air. Please note the recommended speeds.

Matching tool drives:

  • Drill
  • Stand drill
  • Machine tools
  • Robot
Product image Product image Product image Product image Product image
Pferd spiral drill bit steel, pack of 10 Pferd Twist Drill Inox Pack of 10 Pferd HSS cone/deburring countersink, 1 piece Pferd HSS flat countersink with guide pins, 1 piece Pferd HSS Step Drill Bit 14 Steps 1 Piece
Type: Spiral drill Spiral drill Countersink Flat countersink Step drill
Design: Steel in HSS-G (M2) INOX in HSS-E Co5 (M35) HSS HSS, medium quality (M) HSS
Diameter: 5.00 mm 5.00 mm 16.5 mm, shaft diameter 10.00 mm 15 mm. Shaft diameter: 12.5 mm, pin diameter: 9.0 mm 4-30 mm (14 steps). Shaft diameter: 10 mm
Total length: 86 mm (spiral length 52 mm) 86 mm (spiral length 52 mm) 60 mm 100 mm 100 mm
Angle Tip angle 118°, spiral angle 25-30° Tip angle 135°, spiral angle 36° Countersunk angle: 90°
Contents: 10 x Pferd HSS-G spiral drills 10 x Pferd HSS-E twist drills 1 x HSS Countersink 1 x HSS flat countersink 1 x HSS step drill
Machinable materials Steel, aluminium, brass, bronze, cast, plastics Steel, stainless steel (INOX), aluminium, brass, bronze, cast iron, titanium, plastics Steel, cast steel, stainless steel (INOX), non-ferrous metals, cast iron, plastics, other materials Steel, cast steel, stainless steel (INOX), non-ferrous metals, cast iron, plastics, other materials Steel, cast steel, stainless steel (INOX), non-ferrous metals, plastics, other materials
Packaging: Plastic box Plastic box Plastic box Plastic box Plastic box

Product information