Feature

●10-piece clamping pad set for 8 mm T-slot width and M6 thread
●For quick and safe clamping of workpieces, tools and devices
●Material: the individual components are made of C45 tempered steel (material number 1.0503) and have been subjected to heat treatment (increased tensile strength)
●Max. Clamping height: 64 mm
●Hardness [HRC]: 32 | Clamping height (max.) [mm]: 64 | Tool material: C45E steel


Description

This 10-piece clamping pad set with M6 thread is suitable for safe and quick clamping of workpieces, tools and devices.

Material properties:

The individual components in this set are made of C45 tempered steel (material number 1.0503) and are subjected to heat treatment. This leads to an increase in tensile strength.
Manufacturers hardness specification for all components: 32 HRC

Assembly:

The clamping element (step block) provided with an elongated hole is attached so that it rests with one end on the body to be stretched and the other end rests on a step clamp. The pin screw is attached as close as possible to the workpiece and attached to the bottom end on a plate or the machine table. A fret nut is mounted at the top of the pin screw. This brings up the clamping force by tightening vigorously and the workpiece can therefore no longer slip. This allows you to perform your work on the workpiece safely and quickly.

The clamping pad set can be used for workpieces with a maximum height of 64 mm.