Feature

●1. Disconnect the band saw, loosen the saw blade tension and remove the saw blade. Then remove the bandsaw wheel.
●2. Completely remove or cure the old tyre and any remaining residue.
●How to replace a bandsaw tyre?
●3. Part of the tyre the rim and then a short bar or a short tube between the tyre and the wheel. Roll the tube once around the rim to balance the elasticity of the tyre.
●4. Press a small amount of a brush and apply it to the tyre and wheel surface. Roll and repeat the process around the rim. Allow 24 hours to dry before using the saw again.


Description

Hopbucan 12.
Diameter: for 12 (305 mm) band saw wheel.
Suitable for LB1200F, W721, Jet, Grizzly band saws with 2240 mm band saw blades.
Colour: black.
Material: rubber.
Size: approx. 20mm wide x 3mm

Package contents:
2 x band saw rubber tyres.

Only the above package content, other products are not included.
Note: Due to the light and screen settings, the colour tone of the photos and the actual item may be slightly different. The allowed measurement error is +/- 1-3 cm.