Box contents: 6 x stop collar (7 mm), 1 x hex key, 1 x transparent and robust plastic box for easy storage and transport. Depth stop rings, helps you quickly and easily drill to the exact depth you need depending on the required depth. Stainless steel is characterised by good corrosion resistance and heat resistance. and is therefore robust and durable. Mainly used to fix the drill bit and limit the depth of the drill hole so that the depth of the hole can be consistent. The drill limit ring is used for drilling limitation and prevents drilling too deep. After you have adjusted the drilling depth once, you can use a row on the drill he from deep-limited Create holes with millimetre accuracy. Please note: 1. Please allow 1-2 mm error due to manual measurement.2. Monitors are not calibrated same, the colour of the item shown in the photos may differ slightly from the actual object. Please take the real one as standard.
|
|
|
|
---|---|---|---|
Material: 304 stainless steel, stainless steel has good corrosion resistance and heat resistance, so it is robust and durable and can be used repeatedly. Design: Double wire holes have a stronger clamping force and can lock the drill firmly. Can lock the drill more firmly, is not easy to slide, not easy to deviate and more stable than a single wire hole. |
6 pieces 7 mm depth stop collar to meet your daily work requirements. Note: Due to manual measurement, the appearance of the product may vary by 1-2 mm |
Easy to use: Use an Allen key to attach the drill limit ring to the drill stops to limit the depth of the hole and ensure the consistency of the depth of the hole drilled by the drill. |
Each size limiter ring should be selected with the appropriate size drill |
The positioning ring can be used on twist drills, drill bits with drill bit or all types of drill bits to prevent excessive penetration of the drill. To ensure the same drilling depth, this is an indispensable woodworking tool. It is also the best choice for woodworking or manual DIY.
|
|
|
|
---|---|---|---|
Choose the suitable drill size and stop ring, note: The size of the stop ring and drill should be the same. |
Loosen the screw on the drill stop ring with an Allen key |
Slide the collar onto the bit and adjust the desired depth with a ruler or depth gauge. Then tighten the fret screw on the drill |
Tighten the screws on the stop ring until the drill is clamped |
Descriptions:
The stop collar is made of 304 stainless steel, has high hardness, heat resistance and is durable.
The double nematopore design has a stronger clamping force, which can lock the drill firmly.
It is attached to the drill to limit the depth of the drill hole, ensuring that the drill hole depth is constant.
Specifications:
Material: 304 stainless steel
Colour: silver
Size (inner diameter): approx. 7 mm
Note:
1. Due to the light difference, the items color may be slightly different from the pictures.
2. Please allow 1-2 mm difference due to manual measurement.