Feature

●Conventional Boost solutions with constant voltage output, fully integrated solutions, integrated MOSFET, fewer external components, smaller Cos system
●XL6019 5A Current DC to DC Adjustable Boost Power Supply Board Module
●Adjust the blue button of the potentiometer (general pulse counterclockwise, rotation clockwise counterclockwise) and with a multimeter to monitor the output voltage, reaches the required voltage
●Built-in over-temperature protection, full reliability of the overcurrent protection circuit, high reliability
●Input and output must be connected correctly


Description

Description:
MS + -> Positive; IN ---> Negative
OUT + -> Positive; OFF ---> Negative
Input voltage: DC 3-35V (max. 40 V).
Output voltage: DC 5-40V (max. 45V adjustable) Input Current: 5A (Max)
Conversion efficiency: 94% (MAX)
Output ripple: 100 mV (MAX)
Switching frequency: 220 kHz.
Working temperature: industrial (-40°C to +85°C).
Voltage regulation: ±0.5%.
Load control: ±0.5%.
Size: approx. 50 x 28 x 13 mm (L x W x H).

Instructions:
TO263-5L standard housing, suitable for 30W boost indoor applications.

When the power supply is connected as 3-35V, the power indicator lights up, which means the module is working properly.

Adjust the blue button of the potentiometer (general pulse counterclockwise, rotation clockwise counterclockwise) and monitor with a multimeter whether the output voltage reaches the required voltage.

Please note:
Input and output must be connected correctly.
For use at less than 2.5M, longer operating current is recommended while adding the heat sink ground (10W power above); As it amplifies the module, please keep the minimum difference of 1.5V to ensure stable output.

Box contents:
3 x XL6019 5A current DC to DC adjustable boost power supply board module