This product is a step-up power supply module. It has 8-16V and 10V-32V two selectable input voltage range and its output voltage is ± 45-390V. The module is equipped with a multiple protection function including short circuit protection, over-current/voltage protection and reset protection, so you can use it safely. You can use the module for capacity charging, power supply of electromagnetic gun or electronic equipment and check the power supply of voltage or glow pipe.
Technical data:
Input voltage: (2 options, select via the jumper cable on the back of the PCB)
A, 8-16V
B, 10-32V (default)
Input current: 5A (maximum).
Standby current: 15mA (will be higher if 12V to 50V).
Output voltage: ± 45-390 V (standard ± 50 V).
Output current: max. 0.2 A (with input, output voltage).
Output power: 40 W (maximum 70 W).
Working temperature: -40 to +85 degrees (ambient temperature too high, please strengthen cooling).
Frequency: 75 kHz.
Conversion efficiency: 88% (maximum).
Short circuit protection: support (Please do not pull the short circuit arc directly on the output. Direct short circuit arc is likely to damage the rectifier devices. Connect the current resistors in series to limit the current)
Over current protection: support (reduce output voltage at input current over 4.5A)
Surge protection: support (reduce output voltage when it is over 410V).
Reverse input protection: support (backup).
Installation method: four 3 mm screw no-welding terminals.
Package includes:
1 x boost module.