Feature
●Widely used for high-power solar street light driving, various LED lighting CV driving, vehicle mounted and mobile devices power supply, DIY adjustable CV CC power supply, solar power charging and various batteries.
●Designed with intelligent temperature control fan that will work automatically when the temperature reaches about 60°C, and stops when the temperature falls below 60°C.
●High-quality components ensure high conversion efficiency of up to 97%.
●High performance and stable output, it converts 10-60VDC to 12-97VDC.
●This is a non-insulated DC power converter module with long service life.
Description
Specification:
Name: 1500 W step up constant current module
Type: Non-isolated upward module (BOOST)
Input voltage: DC 10 V to 60 V
Input current: 10V-30V input voltage, maximum current is 35A-40A; 31-60V input voltage, maximum current is 30A-35A
Quiescent current: 15 mA (when converting 12 V to 20 V, a higher output voltage increases the quiescent current)
Output voltage: 12-97 V infinitely adjustable (cannot be used for voltage reduction)
Output current: 22A (depending on the difference between input and output voltage, the greater the voltage difference, the lower the output current. Please improve heat dissipation if the current is above 15A)
Constant current range: 0.8-22A(+/-0.3A)Reverse input protection: Yes (150A MOS power reverse protection)
Protection from undervoltage at the input: Yes (10V-50V adjustable, self-recovery)
Operating temperature: -40°C to 85°C (if the temperature is too high, please improve heat dissipation)
Frequency: 150 kHz
|
|
|
|
|---|---|---|
|
Conversion Efficiency: 92% to 97% (Efficiency is related to input/output voltage, current and voltage difference. The smaller difference is, the higher efficiency will be) Input Over Current Protection: Yes (automatically protect when input is more than 40A, and power supply voltage will not increase) |
Short circuit protection: Yes (input 60A) please operate carefully, try not to cause short circuit. Reverse Input Protection: Yes (150A power MOS tube, can be connected reversely for long time) Installation method: Four 3mm standoffs Wiring method: Terminal blocks (Please use large current copper wire) |
Output power: Maximum output power = input voltage x 30 A (if input 12 V, the maximum output power = 12 V x 30 A = 360 W) (If input 24 V, the maximum output power = 24 V x 30 A = 720 W) Weight: 372 g / 13.1 oz (approx.) Package list: 1 x module |
|
|
|
|
|---|---|---|
|
|
|
|
