With our film eraser, you can professionally remove stickers and films and adhesive residue from your car or motorcycle. With a diameter of 90 mm, the eraser has a particularly long service life and is therefore also suitable for professional workshops and everyday use.
Instructions for use:
- For vehicles or vehicle parts with painted surfaces only.
- Recommended RPM (revolutions per minute) 1500-3000 (maximum 4000RPM).
- Before use, clean the areas to be erased.
Areas of use:
- Varnished vehicle parts
- Do not use on plastic parts
- Glass panes
- Tiles
- Various shiny surfaces
The film eraser is only suitable for professional use, use the film eraser at your own risk! Test whether the adhesion of the paint is given on a non-visible area. (No liability for paint damage.) Rough / round off the edges on a clean test piece before first use. Only operate with machines between 1500-4000 rpm. Do not use film eraser on plastic parts. Wear protective glasses, ear protection, respiratory protection and gloves. Try on non-visible areas or other test items before use to estimate the behaviour of the foil eraser. Observe the direction of rotation of the machine. Do not use in one place for too long due to heat build-up, otherwise it can cause burns and damage to the paint. Do not use on polyethylene, polypropylene, perspex, acrylic and various other plastics. For optimal results, polish the erased spots. Do not use solid pressure to avoid damage. Before use, check on a non-visible area to see if the adhesion of the paint is given. No liability for paint damage on our part.