10 bars of dent adhesive Edelmann natural coloured HWS 11 mm x 200 mm. Fits standard glue guns. Dent adhesive HWS with high tensile force. This adhesive can be used all year round and is specially designed for dent removal on painted surfaces. With this adhesive, tests have given the following results under the following ideal conditions: Sheet metal temperature: min 12 °C - 21 °C outdoor temperature/room temperature 12 °C - 21 °C, no direct sunlight. Temperature setting on the glue gun (only if possible): 170 - 180 °C. Instructions for use, preparation and recommended accessories: silicone-free polished painted surface, good quality pull adapters (adhesive pads), glue remover, some practice and patience, a professional dent kit. Result and note when using: - The adhesive can be applied well to the pull adapter, thanks to the natural colour you can control well for blistering. The adhesive develops its full power at/from 170 °C. - Suitable for quick consecutive gluing. - The adhesive residue can be easily removed with glue remover. - The drying time is 2 - 4 minutes depending on the temperature. Notes and instructions for users: All dent adhesives from Edelmann are manufactured in Germany according to own formulas which have proven to be very positive in practice. When purchasing, make sure that glue is black, blue, white, yellow, natural etc. vary by manufacturer. The colouring is for distinguishing purposes only. Our adhesives always maintain consistent quality. The adhesives are adjusted to our premium pull adapters in conjunction with the original adhesive remover and work according to instructions when used correctly.