Feature

●6904ZZ (inner diameter = 20 mm, outer diameter = 37 mm, thickness = 9 mm)
●6904-2Z bearings are shielded on both sides to keep the lubricant in the bearing
●Made of carbon steel, durability and resistance to deformation under high loads
●ABEC tolerance 1 (P0), Z2 noise level for most general purpose applications
●Static load capacity of 3680 N and dynamic load capacity of 6380 N


Description

Note:
Please refer to the picture and select the correct bearing type before placing your order (sealed or shielded on both or single side of the warehouse). The suffix on the bearing is only used to distinguish between sealed and shielded bearing type. This would not affect the use of our product.


Description:


Single row, pre-lubricated, normal accuracy.

The deep groove ball bearings are one of the most commonly used rolling bearings. They absorb radial and axial loads in both directions.

With low friction and high limit speed, the ball bearing is cost-effective and low maintenance.

After quenching, the toughness of carbon steel bearings is superior to that of chrome steel bearings. These low cost bearings are commonly used in areas with low Mohs hardness requirements.

Suitable for all kinds of industrial equipment, micro motors, small rotary motors, office equipment and so on.



Selection help:

shields
(Designation suffix Z/ZZ) - High speed. Protect from dirt and debris.

Sealed
(Designation suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil and liquid resistant). Lower limit speed as shield bearing.


Specification:
Model: 6904ZZ
Seal Type: Double Shielded
Inner ring/outer ring material: carbon steel.
Cage material: stamped steel
Inner diameter (d): 20 mm.
Outer diameter (D): 37 mm.
Thickness (B): 9 mm.
Dynamic load rating (Cr): 6380N.
Static load rating (Cor): 3680N
Accuracy class: P0 (ABEC-1).
Noise level: Z2.
Number of packs: 2 pieces.