Feature
●Dimmable LED bulbs: cosmetic mirror lights with 14 bulbs. The brightness can be adjusted. You can simply press the button to increase or decrease the brightness for make-up. The light is soft and not dazzling, so your eyes are not hurt by the light. It provides professional and comfortable lighting for make-up.
●Easy to install: installation of adhesive tapes. The bathroom mirror light with 2 adhesive tapes is easy to install in minutes and simply stick directly to the mirror surface, mirror frame or wall. The adhesive surface for installation must be clean, dry and smooth, without rust stains and unevenness.
●SUITABLE FOR VARIOUS MIRRORS The maximum distance between two lamps is about 30cm, making it suitable for most mirrors. The excess cables may be hidden in the lamps that are not visible from the outside to keep the mirror clean.
●Durable and Safe The makeup mirror light has good heat dissipation and long service life. Use USB low voltage support, which is safer than an adapter. The USB port and bulbs can be connected in different ways via USB, e.g. as a laptop, power bank, plug etc.
●Home Decoration: This DIY cosmetic mirror light is a must. It can be used for makeup, fill light, decoration lamp, mirror decoration lamp, stage decoration lamp, studio decoration lamp, etc. Light up your makeup mirror or decorate your vanity tops, tabletops and bathrooms. Create a warm atmosphere in your room and let you enjoy life more.
Description
1. Equipped with a dimmer switch to control the light, and the brightness can be adjusted or reduced according to your actual needs.
2. It has a wide range of uses and can be used for make-up mirror, wall, bathroom mirror, bedroom, etc.
3. Each small LED bulb has a cool white light colour, which makes viewing the eyes more comfortable.
4. Give your room a warm atmosphere and let you enjoy life more.
5. USB plug-in, easy to use, saves worry and effort and is safe to use.
Specification:
Condition: 100% brand new
Item type: Hollywood LED Mirror Light
Number of bulbs: 14 bulbs
Power supply mode: USB plug-in
Applications:
|
|
|
|
|---|---|---|
Home |
changing room |
Studio |
How to install:
Step 1: Please specify the storage location before installation
Step 2: Peel off the tape and stick the bulbs one by one
Step 3: Turn the lamps and adjust the length of the wires between the lamps.
Step 4: Turn on the power supply and test the indicator light.
Step 5: Press the dimmer to turn the light on and off and adjust the brightness.
Note:
1. It is recommended to use a USB power supply with 2A or higher, a charger for mobile phones and other standard USB power supplies for mobile devices.2. This product is fixed with double-sided adhesive paste, and the adhesive surface for installation must be clean, dry and smooth, without rust stains and unevenness.3. If the number of lamps is too large, excess part can be cut off without electricity. 4. After gluing the plunger, you need to press the product for about 30 seconds. The best adhesion can be achieved after 24 hours.
Package list:
1 x light strip
2 x adhesive tape
1 x manual
