LED constant current transformer 500 mA/12 W 14-24 V (DC) for LEDs up to 12 W total load. Thanks to their compact design and easy installation via screw terminal, our LED transformers always provide the right power - whether for spots, ceiling lights or recessed lighting. Also perfect as a replacement transformer to repair defective lamps. Compact LED transformer with 7 W minimum load and ballast electronics for connecting many common LED bulbs. With the help of the integrated screw terminals, the DC source is easy and quick to install. The flat design and low heat generation allow space-saving mounting of the ballast, even in tight spaces. The LED driver is approved for installation in furniture and can be mounted discreetly, e.g. B. behind cabinets With constant output current for series circuits and safe electronic isolation according to protection class II. With protection class IP20, suitable for indoor use only. Note: LED transformer is not dimmable. Technical data: ErP Average efficiency in operation 84.7% power consumption at zero load 0.15 W power minimum load 7 W power consumption at zero load 0.15 W W max. Power 12 W dimmability not dimmable max. Power 12.0 W device connections input, voltage range 220 - 240 (AC) V input, type screw terminals x in output, max. Current (DC) 0.5 A output, type screw terminals output voltage (DC) 24 V input, number 2 x IN input, cross section 0.75 mm² output, cross section 0.75 mm² output, number 2 x out output, voltage range 14 - 24 (DC) V output voltage (DC) 24.0 V output, max. Current (DC) 0.5 A General Protection Class IP20 Protection Class II Model Name goobay Colour White, Green Markings House, WEEE, CE Operating Temperature from -20 °C Operating Temperature up to 45 °C Packaging Type Retail Box Dimensions/Weight Length 127 mm Width 50 mm Height 12 mm Weight 60 g Consumption Unit 1 Piece In a box