Spray the tape to be removed directly with the tape remover on one side of the tape or on both sides. Leave the remover for approx. 2-3 minutes. Test with your fingers whether the adhesive connection is movable and repeat the spraying again if the adhesive surfaces do not come off.
Only when the connection is movable can you gently loosen the tape tapes without tearing.
Adhesive residues in your own hair can be combed out of the hair with the tape remover and a handle comb. Then degrease your own hair with an intensive shampoo or exfoliating shampoo or cleaning shampoo or normal dishwashing detergent.
After removing the tape extensions from your own hair, remove the old tape from the extensions. Thoroughly clean the adhesive surfaces with the tape remover and dry the surfaces with a cotton cloth.
All adhesive residue and grease must be removed from the extensions and from your own hair without leaving any residue before applying new tape. Otherwise, the tape tapes may come off the hair early.
To reuse the tape extensions, attach the tape (see shop) to the dry grease-free edge of the extensions and press it firmly with your fingers or with the back of scissors. Then you can put the ready-glued tape extensions back into your own hair.
Do you want to remove your tape-in extensions without damaging them? Then use our Ruby Tape Remover. The preparation specially adapted to our tape-in products releases the extensions easily from your own hair. This makes removing as easy as applying the tapes. It only takes a few minutes.