Feature

●Multiple functions: this toilet water sprayer offers two spray modes (jet/stream), which can be replaced by turning the spray head. Stream mode mainly for cleaning the private body part, for a more convenient water outlet, less splashing water and saving toilet paper. Jet mode for cleaning the toilet, washing a cloth nappy, bathing your pet and so on.
●Strong water flow: Press the manual button to drain water for gentle and thorough cleaning. In jet spray mode, you get a strong water flow, which is ideal for cleaning the toilet or potty.
●Humanised design: the retractable flexible hose made of PU material with spring type can be adjusted to the most comfortable position as needed. Humanized design, more portable, brings a comfortable experience to your life.
●Easy and quick installation: 10 minutes without the help of others. There are two ways to install the bidet sprayer for the bathroom, which can be installed on the wall or on the toilet container. (All you need to do is pay attention to it and ensure that the diameter of the toilet container inlet is 1/2 inch or 3/8 inch).
●Environmentally friendly cleaning options: the paper comes from trees. If there is no sprayer, a lot of paper is used for cleaning, which is not environmentally friendly. Now hand bidet sprays can prevent all these situations. This is very convenient for various washing activities, including bathing, washing and nappy cleaning for pets.
●Satisfactory service: As a responsible and reliable seller of Amazon, we attach great importance to the shopping experience of our customers. Provide 24 hours / 7 days customer service. If for any reason you are not satisfied with the bidet sprayer, please email us and let us know.


Description

Installation steps:
Step 1: Turn off the toilet water supply and empty the toilet tank
Step 2: Disconnect the flexible water supply pipe under the toilet tank.
Step 3: Before you install the rubber gasket on the toilet tank, make sure the rubber seal is properly on the T adapter adapter. Then connect the flexible water supply pipe back to the bottom end of the T adapter
Step 4:Make sure the rubber gasket at both ends of the metal hose is properly connected; connect one end of the hose to the open end of the T adapter and the other end to the nozzle.
Step 5: Lift the lid of the toilet tank and hang the nozzle on the edge of the tank.
Step 6: Open the valve of the water supply line (the valve was closed in step 1). Check for tightness and check again after 10 minutes. Use plumbing tape for leaky connections.
Whats in the box?
1 x bidet hand shower.
1 x 150 cm / 59 inch hose.
1 x holder.
1 x hook.
1 x G1/2 T-valve.
2 x G3/8 adapter.