Feature(may vary by option.)
●High-quality material: the hand shower of the bidet is made of 304 stainless steel, which is not easy to rust, corrosion-resistant, scratch-resistant, high-quality and durable.
●Environmental protection: this bidet toilet sprayer uses water-saving technology to reduce water and energy consumption; the flexible handheld design provides a perfect cleaning experience; the perfect combination of environmental protection and comfort.
●Multifunctional: This hand bidet sprayer can be used for body cleaning, womens hygiene products, pets, bathrooms or some corner cleaning. It is also a good tool for people with post-operative discomfort, arthritis, delayed childbirth or injuries.
●Easy installation: this hand bidet sprayer is easy to install. Use the attached accessories and follow the installation instructions. You can have a toilet bidet sprayer in 10 minutes.
●After-sales service: If you have any questions about installation or use, please feel free to contact us at any time. Reminder: When you dont use the spray gun, please close the T-valve and shut off the water supply to prevent the hose from leaking due to excessive pressure.
[3 & 8 Ventil]
[1 & 2 Ventil]
Description
|
|
|
|
|---|---|---|
|
The water accumulates in the sprinkler, and the water pressure is higher. With this bidet hand shower, whether mop, toilet or corner, it can be rinsed cleanly without hand cleaning. |
Strong pressure, easy to rinse. The nozzle has a high swing, which makes cleaning easier, and the areas where the spray has been washed are very clean. |
This hand bidet sprayer can be used for body cleaning, womens hygiene products, pets, bathrooms or some corner cleaning. It can also be used for washing cars, fruit and vegetables and baby nappies. |
|
|
|
|
|
|---|---|---|---|
Stainless Steel Hand Bidet Sprayer HeadsThe bidet nozzle is made of 304 stainless steel, sturdy and durable, corrosion and rust resistant, not easy to deform or break, high quality bidet nozzle |
Brass valveEquipped with a 1/2 inch valve, this three-way switch valve complies with the European standard and is suitable for Europe. The sturdy brass housing is very durable and can greatly reduce the appearance of water leakage. |
bracketThere are two ways to install the bracket, which can be attached to the toilet or wall to make the placement of the bidet nozzle more convenient. |
1.15 m explosion-proof hoseHigh pressure resistant 304 stainless steel hose with brass hose nut is designed for use with a hand held bidet sprayer and remains fully flexible under pressure. |
Box contents:
1 x bidet sprayer
1 x 115 cm hose
1 x G1/2 inch T-valve
1 x spray stand
1 x Teflon tape
2 x washers
2 x screws
1 x assembly instructions
Note: Your toilet must have a flexible water supply pipe to install a bidet sprayer. No flexible water supply pipes are included.
Step 1: Turn off the toilet water supply and empty the toilet tank
Step 2: Disconnect the flexible water supply pipe under the toilet tank.
Step 3: Before installing the rubber seal to the toilet tank, make sure the rubber seal sits properly on the T adapter adapter. Then reconnect the flexible water supply pipe to the bottom end of the T adapter
Step 4: Make sure the rubber seal is properly connected at both ends of the metal hose; connect one end of the hose to the open end of the T adapter and the other end to the nozzle.
Step 5: Lift the lid of the toilet tank and hang the nozzle on the edge of the tank.
Step 6: Open the valve of the water supply line (the valve was closed in step 1). Check for leakage and check again after 10 minutes. Use plumber tape for leaking connections.
