Feature

●The set consists of a wireless built-in receiver and a high-tech wireless window contact switch DFM-1000, which monitors windows or doors whether they are open. Important: the output is a potential-free currentless changer, therefore light function can be used.
●High-tech transmitter: the additional connection option of additional (reed) sensors also allows simultaneous monitoring of 2-leaf windows with just one radio transmitter. With expert mode AND/OR circuit.
●The radio receiver of the exhaust air set wirelessly switches on the cooker hood, fans and electrical appliances up to 2300 W when window or door is opened. Switching mode selectable, so can also be used for switching off heating or air conditioning.
●Attention, important for the light function: only if the appropriate supply line to the motor is switched instead of the power supply, the light function is retained. Please ask your electrician before purchasing. Intervention in the hood required. The connection must only be done by a specialist electrician, as 230 V. !
●Dimensions (L x W x H): magnet: 56x13x11 mm, transmitter: 72x39x20 mm | receiver: 115x45x30 mm. Colour: white. WEEE + Lucid registered. Not for required DiBt No.


Description

Product description

DIW-Funk Installation Exhaust Control DAS-2090-E
Why do you need this set?
A cooker hood may only be operated when the window is open, if a gas, coal or tiled stove is used at the same time. Otherwise, toxic exhaust gases can be sucked back into the room.
...and its that easy:
You attach the magnetic transmitter to the window and the magnet to the frame or vice versa.
When the window is opened, the sensor sends an ON signal to the radio receiver. This switches the extractor hood and it can be operated. When the fixer is closed, the extractor hood goes out.
Switchable so that the set can also turn off heating or air conditioning when a window is opened. High switching capacity up to 2300 watts. For dry interiors.

Advantage "light function": in contrast to plug versions, the light function of the cooker hood can remain, i.e. the light of your cooker hood can work with correct connection even when the window is closed. The potential-free changer as output makes it possible.

However, this special connection must be done by an electrician. Intervention in the hood required. Not suitable for all, not with DiBt.-No.



Voltage switch: 230 VAC, 50 Hz, transmitter 3 V battery (included).
=> Installation only allowed by an approved electrician.
Switching capacity: max. 230 V AC/10 A up to a power of 2300 W.
Switch type: potential-free changer, no output voltage measurable.
=> For the light function, the cable connection is required directly at the motor of the cooker hood.
=> High radio range: up to 50 m (free field).
=> Request FAQ if needed.

Legal Disclaimer

Installation must be carried out by a professional and requires electrical technical knowledge