Feature

●【Adjustable Cutting Depth and Width】: Cutting Depth: 30-36mm/Width: 5-32mm/Cutting Blade Diameter: 110-129mm
●Infrared guided grooving: thanks to the infrared scanning of the front end of the wall slot machine, the cutting position can be determined and the cut is more accurate
●【Closed Suction Pump & Suction Pump Joint】The water pump sprays fast water to wash the cutting wall surface, which not only wash off the dust, but also greatly improve work efficiency, but also extend the life of the cutting knife.
●【The 360 Degree Rotated Handle】: According to the ergonomic design, the angle of the handle can be adjusted in different working scenes, so that it can be used at any cutting angle and is easy to use.
●【Application】:This slotted router bit is suitable for professional water and electricity installations, decoration and repair companies, maintenance team and DIY home renovation. It is perfectly applied to ceramic tie, concrete, red brick, hollow brick, marble and so on.


Description


Parameters:

Model: 129-1 Rated input power: 2600WSize: 41 cm x 15 cm. Blade diameter: 110-129 mmDischarge speed: 7000 rpm. Charged energy: 4500 W. Rated power: 4500 W. Rated voltage: 220 V. The machine net weight: 5.3 kgThe whole package: 10 + kg.

Notes:

You can change the number of metal cushions in between and the number of blades to adjust the slot width.

The chaser is equipped with a guide light on the handle to allow precise slotted work. Due to the air transport restriction, the number 7 batteries must be removed. Use the screwdriver to open the battery compartment on the handle and insert the battery no. 7 batteries to ensure the light works.

  • Installation of the blades:
  • Insert the round metal cushion and mount the blade between the blades. Please note that there should be metal cushions between the blades.
  • Make sure the blade is installed in the correct direction. The arrow direction on the knives should match the one on the machine.
  • Tighten the lid screws with the screwdriver.

180° rotating rear handle.

The rear handle can be rotated 180°. By pressing the rotary switch on the rear handle, the left and right handles can be rotated 90° to facilitate operation at different angles.

Supportive activity wheel.

Unique design of the movable lower roller to significantly reduce work intensity.

Adjustable puncture depth

Adjust the base plate up and down to adjust the groove depth.

Adjustable cutting depth 15 mm cutting depth range 21-36 mm.

Efficient gear design

The gear design is reasonable and not interlocked. It differs from the transmission structure of the general shock machine on the market.

Product information