Feature

●[Size] - Threaded. : M3; pitch: 0.5 mm; total size: 5 mm x 4 mm / 0.20 x 0.16 inches (outer number *L)
●[Material] - It is made of brass with rust resistance, good thermal conductivity and heat resistance.
●[Features] - The embedding nut has a guide, so no lowering or lowering is required. Smooth surface, firm and even, easy installation.
●[Advantage] - Due to the embossing process on the outer diameter of the insert, it forms a certain friction and biting force with the brass insert after reshaping, which can be fixed inside so that it cannot fall off. It has a certain torsion and tension.
●[Application] - It can be built into the plastic matrix by ultrasound or heat or shaped during injection.


Description

Description:


It is made of brass material with high hardness, durability, good thermal conductivity and heat resistance.

The embedding nut has a guide so no lowering or lowering is required. Smooth surface, firm and even, easy installation.

This knurled nut can be used on the injection molded part for tight fixing.

It can be built into the plastic matrix by ultrasound or heat or molded during injection.

Due to the embossing process on the outer diameter of the insert, it forms a certain friction and biting force with the brass insert after reshaping, which can be fixed inside so that it cannot fall off. It has a certain torsion and tension.



Specification:

Material: brass.
Surface: vibration polishing
Thread size: M3 x 0.5 mm (Dmr. *Pitch)
Total size: 5 mm x 4 mm / 0.20 inches x 0.16 inches (outer number *L)


Package Content:

120 x knurled nuts