Feature(may vary by option.)
●No installation required, plug and play: The laser rotary rollers are 100% installed in the package, equipped with an adapter cable and only need to be connected to the Y-axis wiring of the laser engraving machine to engrave cylindrical objects, such as wine glasses, bottles, rings, balls, ballpoint pens, water bottles, etc.
●Larger engraving space: The design of the Sculpfun roll base is lower and more stable and equipped with 4 sturdy metal feet. so that it has a larger engraving diameter of 6-150 mm and a cylinder length of 0-230 mm, which can meet more engraving requirements. Metal feet are firmer than plastic feet and the machine is more stable when engraving.
●Easy sliding adjustment design: the SCULPFUN laser rotary attachment adjusts the size of the distance between the two shafts by moving; and fixes the shaft by turning the knob by hand, which is easier and faster than the conventional multi-stage fixing hole adjustment.
●High precision engraving with 100% original scale: The SCULPFUN laser roller uses a 70A rubber shaft with high friction to prevent slipping, and the linear speed of the rotating surface has been accurately calculated. Connect the cable of the engraving machine directly to engrave the original image in 100% proportion. Does not enlarge or decrease the image.
●Extensive compatibility: The SCULPFUN rotary roller engraving module is suitable for multiple engraving software such as Lightburn or LaserGRBL and can be used directly without the need to set parameters. In addition, compatible with 95% laser engraver on the market.
[Scooter]
[33w]
[S30 22w]
[33w+h600+roller]
[Ultra-11w]
[H600]
Description
SCULPFUN rotary roller
Product introduction:
Application Disconnect the Y axis motor wiring of the laser engraving machine, connect the rotary roller to the Y axis cable, and you can use it. There is no need to set parameters in the software because the linear surface speed of the roller is the same as the original speed of the Y axis.
Available engraving space: cylinder diameter 5-150mm, cylinder length 0-230mm
Compatible software: Lightburn, LaserGRBL, Benbox, GrblController, LiteFire, etc. No software needs to be set up as the linear surface speed of the roller is identical to the original Y-axis speed.
Compatible Machines: Suitable for all GRBL motherboard types of engraving machines.
Shaft distance adjustment: the shaft spacing can be adjusted continuously by sliding and fixed by hand-tight screws.
Product packaging:
Product size: 27 x 22 x 5 cm
Product packaging size: 34 x 25 x 9 cm.
Product packaging weight: 1.5 kg
Packing list for laser rotary rollers:
1 x roller device.
1 x A-type wiring.
1 x B-type wiring.
4 x feet lift.
1 x screw bag.
1 x soft ruler.
1 x user manual.