The process is divided into four steps:
1) Clean your touch screen with the green cleaning cloth "1" (wet) and the red cleaning cloth "2" (dry). Only the edges of the screen should be touched with your fingers, as the grease from the fingers can cause problems.
2) Remove dust from your touch screen with the blue "dust absorber" stickers. Since they stick really strong, you should only touch them at the ends - not in the middle. Use the square stickers for the edges of the screen and the round sticker for the main part of the screen.
3) (See attached diagram) Separate the protective film - the thick protective film applied to your touch screen - from the thin protective film. Hold the black tab and gently pull from one corner obliquely to the opposite corner or straight ahead if you are really skillful. Now the fixed screen protector can be applied. As mentioned, you should only touch the screen protector at the edges. Carefully place it on your clean touch screen. Gently press the surface of the screen protector. If it turns from grey to black, this means that it sticks to the touch screen.
Gently wipe the screen protector from the center to the outside with a soft cloth (not with paper towels as they scratch the surface) until your new screen protector adheres completely to your touch screen.
Now you have protected your touch screen from possible damage. -
Package includes:
2 x tempered glass film for Canon EOS M50, M100 / Rebel, M6, SL2 digital camera.
2 x Wet Cleaning Paper Towel
2 x Dry Cleaning Paper Towel
2 x Dust Absorber
Accessory only, cameras in the picture are not included