[V2.4.1 Pcb]

[V1 Tap Kit-hiwin]

[V1 Tap Kit]

[Tap Sls]

[V1 Pcb]

[V2.4.1 Tap Kit-hiwin]

[V2.4.1 Tap Kit]

The M3x6 FHCS screws are nickel plated and magnetic.
Tap is a nozzle-based Z probe for the V2 and Trident printer designs. The entire tool head moves to trigger an optical switch. Tap offers many advantages:
Extreme precision 0.4 m (0.0004 mm).
Any construction surface and easy change as desired.
Durability thanks to optical sen-sor (million probe cycles).
High temperature reliability (70°C to 100°C).
Simplified probe mechanism (no docking/undocking macros).
No separate Z end stop required
Crash protection
Requirements:
The bed must be stable for a test force of 500-800 grams
Switchwire, V1.8, Legacy and V0 beds are NOT stiff enough
Mounting on the X-axis MGN-12H.
Front mounted extruder (Clockwork2, LGX, Galileo)
Accuracy depends on good mechanical condition
The tool head or the special 24 V sen-sorboard must be 5 V.
Tap the complete kit:
1 x OptoTap v2.4.1 board (EE-SX398).
1 x 50 mm MGN9 rail with 9H slide (Hiwin optional).
2 x 6 mm x 3 mm magnets.
11 x M3 heat set insert.
1 x H3 hex nut.
6 x M3 washers.
1 x M3 x 6 SHCS.
3 x M3 x 8 SHCS.
1 x M3 x 12 SHCS.
2 x M3 x 16 SHCS.
2 x M3 x 20 SHCS.
2 x M3 x 6 FHCS.
10 x M3 x 6 BHCS.
2 x M3 x 10 BHCS.
V1 5V:
Material: SLS PA12