Feature

●Main Material – Breathable Mesh and sponge pillow; Aluminium Alloy Bracket.
●Good flexibility – can be adjust the angle and the height of the bed head cushion in accordance with on your needs.
●Practical – if you dont want to use or close the wheelchair, all you have to do is remove the headrest part.
●Area of Application – The diameter of the sliding hand a tube for a wheelchair or commode should be 27 ~ 28 mm, and it is better for an round bar. Please make sure that the mouth the wheelchair pole is suitable to make the solid clamp to install. Suit for seat width 40 ~ 52 cm Wheelchair.
●Easy to install and easy to use according to the actual situation of the user can adjust the angle of the head support and headrest height (high back Wheelchair can only adjust the height of the headrest in; cant the front and rear head angles).The wheelchair is only suitable for models, the package contains no wheelchairs.


Description

Features:
1st Aluminum Alloy material + mesh + Sponge.
2nd but are great for wheelchair or drawers, that are 40 ~ 52 cm wide
3 according to the actual situation of the user can adjust the angle of the car headrest and headrest Height
Use Contents:
The diameter of the sliding hand tube for a wheelchair or commode chair must be 27 – 28 mm, and it is recommend you an photographing tubes, not a square tube, and flat tube cannot be installed. There is a room of approx 5 cm to clip to install, the seat width varies from 40 ~ 52 cm – DH the distance between the push handles is between 40 – 52 cm