Feature

●1. [Operating Frequency] This low-noise RF amplifier LNA is 50-4000 MHz, = 0.6 dB
●3. [Wide Usage Range] This LNA for primary mobile communication base station infrastructure applications such as wireless communication transceiver cards, tower amplifiers, combiners, repeaters and remote/digital wireless broadband terminal applications
●4. LNA RF amplifier: This is a LNA RF amplifier with a low noise figure that produces less noise and distortion while amplifying the signal
●2. [Application] It is often used as a high frequency or intermediate frequency preamplifier for various radio receivers as well as an amplifier circuit for highly sensitive electronic detection devices
●5. [Improve signal to noise ratio] In case of amplification of a weak signal, the noise of the amplifier itself can be very strong, so it is desirable to reduce this noise to improve the signal-to-noise ratio of the output


Description

TRULOVE Extremely low-noise value = 0.60 dB at 900 MHz.
Gain: 18.7 dB at 900 MHz.
High linearity: OIP3 39.5dBm at 1960MHz
P1db = 22.7 dbm at 1960 MHz.
Single supply operation: 5V for IDO = 90MA.
Flexible pre-voltage options: 3V to 5V, adjustable currents
Broadband internal matching
Cellular, PCS, W-CDMA and ISM-WIMAX receivers
PA Driver Amplifier
Applications for low-noise reinforcement blocks with high linearity
Colour: green.
Material: PCB + metal.
Size: 5 x 2.5 x 1 cm

Package Content:
1 x RF amplifier.

Only the above package content, other products are not included.
Note: Due to the light and screen difference, the colour of the item in the photos may be slightly different. The allowed measurement error is +/- 1-3 cm.