Feature

●FOR HOUSEHOLD The ATS has a compact structure, reliable transmission, convenient installation and maintenance, is specially designed for rail installation and designed for the PZ30 distribution box. Convenient to use
●MILLISECOND SWITCH WITHOUT INTERRUPTION: When the normal power supply is abnormal, the emergency power supply works immediately and the power supply is switched in milliseconds without interruption, which is very useful.
●Wide application: switch to the emergency power supply in the event of a power failure and to the main power supply in case of power recovery. Widely used in different places where a constant power failure is not allowed, e.g. in factories, shopping malls, nurseries, etc.
●MILLISECOND SWITCH WITHOUT INTERRUPTION: When the normal power supply is abnormal, the emergency power supply works immediately and the power supply is switched in milliseconds without interruption, which is very useful
●Safe and flame retardant: made of excellent flame retardant PC materials, has good insulation, is high temperature resistant, resistant to aging, safe and reliable. The use of silver contacts can significantly improve the conductivity and life of the product. Can be used with peace of mind


Description

Specification:
Item type: dual power automatic transfer switch.
Material: PC, silver.
Rated current: 100 A.
Insulation voltage: AC690V 50Hz.
Rated voltage: AC230V 50Hz.
Coil voltage: 220 VAC.
Level: PC level
Specifications: 2P
Lifespan: Electric: 2000 times; Mechanical: 5000 times
Nominal short circuit current: 50 kA.
Fuse: RT16-00-63A.
Nominal pulse strength: 8 kV.
Control circuit: rated control voltage US: AC220V 85% Us-110% US
Auxiliary Circuit: Two relays, each relay has two sets of contacts. Capacity: AC220V50HZ le=5y
Touch Time: Operation Transition Time: Return Time: Off Time:

Package list:
1 x dual power automatic transfer switch.
1 x user manual (English language not guaranteed).

Note:
1. The maximum ambient temperature should not exceed 40°C, the minimum should not be below -5°C and the average temperature within 24 hours should not be higher than 35°C.
2. The height of the installation site should not be higher than 2000 metres.
3. When the maximum temperature reaches 40°C, the relative humidity at the installation site should not exceed 50%; when the temperature reaches the lowest value of -5°C, the relative humidity is higher. For example, if the temperature is 25°C, the relative humidity is 90%. Special measures should be taken against occasional condensation on product surfaces due to temperature fluctuations.