Package contents:

2 x flat adhesive fixings

2 x curved adhesive attachments

4 x 3M safety straps

1 x Quick Release Buckle Clip Holder

1 x J hook buckle clip holder

2 x knurled screws

Action camera seat belts & strong stickers for GoPro

Protect your camera in difficult situations with a seat belt. A little mind for a few pounds. Simply loop the strong cord around your camera body and stick the strong 3M VHB adhesive pad on a flat surface. Even if your holder fails, the camera is held close to the seat belt.

Suggestions for using the adhesive attachments

Apply the brackets to a smooth and clean surface. A textured surface or other irregularities on a smooth surface prevent a strong adhesive from forming. Press the holders firmly on the entire surface. Make sure that the medium is applied at room temperature and allow the fixation to adhere well to the surface for at least 24 hours. Adhesive backing for removing the adhesive. You can use a hair dryer or a heat gun to soften the adhesive and slowly peel off the back. Adhesive attachments for helmets, not for textured surfaces, as the brackets cannot stick. It is generally not recommended to use adhesive attachments on skis or snowboards such as flex and vibrations, which can sometimes cause the device to come off.