Fischer Thermax set M12 16/170 including mounting mortar and adhesive sealant awning set mounting mortar FIS V300 T with approval, adhesive and sealant Multi MS 290 ml. The styrene-free hybrid mortar FIS V300 T is the worlds first system to be used for fixings in perforated stone, solid stone, concrete. Aerated Concrete and aerated concrete approved. The distance mounting system is approved in combination with the injection mortars FIS V and FIS SB for high loads in a variety of building materials. This allows for secure attachment. Usable lengths from 60 to 295 mm can be covered with a Thermax. The plastic cone interrupts the heat bridge between the attachment part and the inner attachment and provides an energetically optimised attachment. The fibreglass-reinforced plastic cone mills form-fitting into the WDVS and thus allows easy, quick and adjustable installation without special tools. Approved for: concrete, cracked and uncracked perforated brick, hollow block made of light concrete, lime sand, perforated brick, lime sand, solid brick. Also suitable for: aerated concrete. Operating method: the Thermax16 systems are suitable for pre-plug-in installation. The self-cutting, fibreglass reinforced cone mills directly through the plaster into the insulation material of the anti-cold. The heat interrupts the heat. Reliable bridge. For a durable plaster (e.g. thick cement plaster), it is recommended to use the enclosed Thermax milling blade for mushing. By sealing the ring gap with the multi adhesive and sealant KD, the facade is sealed back in the plaster level. Thickness of thermal insulation 16/170 M12: 60 mm - 295 mm. Box contents: 4x Fischer TherTher4x Max M12 16/170 4 x Fischer screen sleeves 4 x anti-cold insulation cone 4 x nuts A4 4 x washers A4 1 bit 1 cutter blade 1 x extension hose for static mixer 2 x 300 ml Fischer mounting mortar FIS V300 T with approval 4 x static mixer mounting mortar 1. Fischer adhesive x Fischer adhesive. and sealant multi MS 290 ml