Feature(may vary by option.)

●Locking bolts are used to prevent changing the locking position due to transverse forces.
●These hand retracting pistons have a resting position where the plunger can remain in the retracted position.
●Steel, galvanised piston pin.
●Carbon steel, piston body made of galvanised
●A new locking position can only be adjusted after the latch is manually released.

[M8 As Described]

Description

Description:

- Locking bolts are used to prevent changing the locking position due to transverse forces.

- A new locking position can only be adjusted after the bolt is manually released.

- Carbon steel, piston body made of galvanised

- Steel, galvanised piston pin.

- These hand retracting pistons have a resting position where the plunger can stay in the retracted position.

Specification:

- Material: metal.

- Colour: as shown in the picture.

- M0: 65 × 28 mm / 2.56 × inches,

- M6: 40 x 9 mm / .57 x 0.75 inches.

- M8: 55 × 25 mm / 2.7 × 0.98 inches.

- M6: 80 x 43 mm / 3.5 x , inch

Package includes:

Stü indexing piston.