Feature

●It is a 6 hole pull starter only for 47mm high pulley, not for 57mm. Please check the jack and ratchet type, nut hole positions and product sizes with your original parts before ordering as the GX Clone models vary in the details.
●The recoil pull starter assembly is black hexagonal, iron plate pawl, and it comes with an OEM nylon 66 pull rope, compatible with GX pull cord with 4.0mm diameter. The diameter of the lug and the plastic case is 54mm/75mm. Center to center of bolt hole is 139mm (triangle pattern), 160mm (hole to hole center through starter center).
●Comes with 1 recoil starter, 1 pull rope, 3 mounting nuts in bubble wrap and plastic bag packaging.
●Suitable for many generators with 160cc 196cc 200cc 212cc 224cc engine, for Champion Firman Predator ETQ etc. Honda clones such as Predator 212 CT 200 CT200U-EX BT200X KT196 JF168 JF200 etc., for lawnmowers, edge cutters, snow blowers, Pressure cleaner, water pump, water pumpATV, mini bike, motor tillers, go-kart etc.
●OEM standard aftermarket parts, with new design soft rubber grip.


Description

YAMAKATO Series OEM standard pull starters are compatible with Honda GX and Clone small engines, in generators, water pumps, lawn mowers, pressure washers, snow blowers, tillers, edge cutters, go cart, ATV and mini dirt bikes etc, also compatible with Harbor Frieght Predator, Generac, Coleman, GPS, Champion, Troy Bilt, ETQ, Centurion, etc. The starters can carry 8000 times pull test standard in the laboratory of the small engine manufacturer. Comes with an OEM standard pull cord rope so you can replace it if you accidentally break the pull rope. Please check the type of pawl and revenge, also the positions of the six holes on the starter. Installing a starter requires 3 holes to be attached with nuts. This product description applies to all different pulley starter models. Please check the product name and pictures to make sure you order the one you need. YAMAKATO focuses on OEM parts of Honda clones in cost-effective supply. The position of our OEM parts is original of quality Honda clone engine supply chains, such as sellers for Firman, Champion, Predator, Rato, Loncin, Lifan... etc.