Feature(may vary by option.)

●When you insert the wire screw set into the screw hole of the workpiece made of aluminium alloy and other materials, it can form a high-strength, wear-resistant and high-precision standard internal thread
●Allows cost-effective repair of the threaded hole. If a thread defect occurs or a damaged internal thread hole is repaired, a threaded insert can be used as a repair method
●Threaded inserts can be used to convert between metric and inch threaded holes, which is very practical and useful
●Wire thread inserts are also called threaded sleeves, stainless steel threaded sleeves or wire sleeves and are a new type of female threaded fasteners. Use of high-strength, high-precision steel wire with diamond-shaped cross section
●Application to low strength technical materials such as aluminium alloys, zinc alloys, alloys, copper, plastics, engineering plastics, etc. can significantly improve thread strength and wear resistance

[3D]

[2D]

[1D]

[1.5D]

[2.5D]

Description

Specification:

Item Type:Threaded Inserts
Material: SUS304.
Model: M14x2.
Thread specification: M14x2 (mm)
Outer diameter before installation: approx. 16.7 ~ 17.2 mm / 0.7 ~ 0.7 inches.
Diameter of drill bit for installation: approx. 14.5mm/0.6" 1D/1.5D/2D/2.5D/3D:
Length after installation: approx. 14 mm / 0.6 inches, 21 mm / 0.8 inches.
28 mm / 1.1 inches.
35 mm / 1.4 inches.
42mm/1.7inch Number of turns before installation: 5.4/8.7/11.9/15.2/18.4
Specification Description of Threaded Sleeve Model:For example:M3x0.5X1.5D, which means that after completion of the screw set, the female thread M3, the pitch is 0.5 and the length is 1.5D (the length refers to 1.5 times). Diameter, i.e. 1.5 x 3 = 4.5 mm), the length refers to the length after installation.

Package list: 20 x thread inserts