Feature:
Wooden dowels assorted have 16 sizes of holes from 4mm to 16mm.
The advantage of drilling holes in small steps is that the operation requires minimal shock.
Precision machined and ground 10mm thick tool steel.
Make custom dowels from hardwoods, softwoods and exotics.
Specifications:
Material: Steel
Size: 6 x 2 x 0.4 inches
16 holes: 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 13.5 mm, 14 mm, 14.5 mm, 15 mm, 15.5 mm, 16 mm.
Application:
Prepare a hard hammer tool and a place for the wooden nails.
Attach the dowel plate to the workbench and cut off the blank with a chisel until you find the straightest grit, otherwise the nails will not be straight.
Cut 4 corners of the front end of the blank;
Find the most suitable hole and tap it with a tool to go through the dowel plate.
Then move the blank into the next hole and repeat the previous step until you achieve the desired effect.
Note:
This steel plate can form up to 15 cm pins, the smaller the hole, the shorter the length of the pins.