Feature(may vary by option.)
●Pitch: /
●Width measured from flat to flat: /
●Total height: /
●Suitable for 1mm thick mounting plate, the diameter of the mounting hole is approx. 6mm
●Ideal for applications where a thin sheet requires resilient threads but must remain smooth without protruding on both surfaces.
[M3x1.5mm(25 pcs)]
Description
These spacers, which use the tried and tested self-tapping design, can be inserted with a pressure into punched or drilled round holes and are permanently mounted in the thin plate.
At the crossroads of the hexagon and the cylinder, there is an escrape, which makes the riveting effect stronger and cannot be easily loosened.
When using blind thread types, the outer sheet surfaces are not only flush but also closed. Spacers without threads are also available for spacing multifield assemblies.