Feature(may vary by option.)
●High-quality brass: this pressure regulator water is made of high-quality brass material, wear-resistant, not easy to rust, strong and durable.
●Precise pressure gauge: the pressure regulator water set comes with a pressure gauge, which allows you to accurately monitor the pressure value. So you can easily control and adjust the water pressure.
●Strong practicality: pressure regulator water 3/4 inch which is suitable for different types of environmental conditions. Easy to connect to the tube, easy to use and very practical.
●3/4 inch water pressure regulator with sieve filter: pressure regulator water uses a mesh filter made of stainless steel, on the surface of which impurities are retained.
●Versatile application: this pressure regulator water can be installed in front of most tap water devices, applicable to water purifier, solar energy, gas heater, tap, etc.
[Brass1]
[Brass]
Description
Pressure reducing valve working principle:
The working principle of the pressure reducing valve is based on the pressure balance of two basic points, when opening the removal points in the system, the spring force exceeds the opposite membrane force, the valve cone moves down and allows water to flow through.
The working principle of the pressure reducing valve isbased on two basic pressure balances:
1. The force applied by the spring downwards to open the piston;
2. The force of the diaphragm acting upwards to close the piston.
Specifications:
Material: brass.
Connection shape: external thread.
Material (body): brass.
Medium: Water
Interface: 3/4 inch (with half screw)
Filtration Accuracy: 10-60µm
Applicable water pressure: 0.1-0.6Mpa(0-87psi)
Maximum air inlet pressure: 1.0 MPa.
Applicable temperature: 4°C - 40°C.
Pressure gauge: 1 MPa.
Valve body size: 14.4 × 10.5 × 15.4 cm
Interface size: G3/4 (DN20)
Weight: 790 g.
Box contents:
1 x pressure gauge.
1 x brass water pressure regulator.