This drill stand in combination with a standard drill is an affordable, space-saving and mobile alternative to the bench drill. Optionally, the drill stand can be screwed on a worktop with the help of four countersunk screws. Thanks to the tilt function, holes can be drilled at any angle between + 45° and -45°.
The prism support can be rotated and is suitable for drilling pipes or round material. By turning the support by 90°, flat material can be drilled. Thanks to the central hole in the prism support, the drill stand is not damaged. It is also good for drilling central holes in round material.
The drilling angle is adjusted by loosening or tightening the plastic knobs at the top of the guide rods. The guide rods are secured by a groove in the drill table against twisting, here is also a scale for coarse adjustment of the angle.