Specification:
Drill guide material: aluminium alloy.
Bushing material: nitride tool steel.
Drilling thickness: 10-180 mm.
Side Hole Diameter: 15mm
Direct hole diameter: 6/8/10 mm.
Slide stroke: 5-90 mm.
Side hole stroke: 23-43 mm.
Size: as shown in picture.
Approximate weight 1550g
Package contents:
1 x extension locator.
9 x drill bushings (pack of 3). 6 mm, 3 pieces. 8 mm, 3 pieces. 10 mm.
2 x knurled screws.
4 x limit ring (1 piece). 6 mm, 1 piece. 8 mm, 2 pieces. 10mm
1 x 15 mm taper.
3 x drill bits 6/8/10 mm.
1 x hook wrench.
1 x slider.
1 x motherboard.
2 x Washers 0.5 / 1 mm.
1 x Allen key.
1 x user manual.
Note:
As the slider is moved by 2mm each time, it can only be aligned with the plate centre of 10, 14, 18, 22mm etc. If the thickness of your plate does not match this thickness, it can not be aligned with the centre, punch hole without adding washers.