Features:
*8 inch: Use for band saw wheel diameter 205mm, recommended band saw blade length is 1425mm.
*To ensure that the non-slip rubber ring can be firmly connected to the outer edge of the wheel and avoid slipping and insufficient cutting force due to a loose rubber ring, the circumference of all non-slip rubber rings must be smaller than the circumference of the band saw wheel.
*The rubber ring has good wear resistance and toughness and ensures that it does not break easily and loosen after installation.
Installation method:
1. Remove the damaged original rubber ring. If there are rubber ring residue on the outer edge of the wheel, please remove them first.
2. Soak the new non-slip rubber ring in warm water for 3-5 minutes and install it after the rubber ring has become soft.
3. When installing, start on the side of the wheel, press the end of the rubber ring firmly into the groove on the outer edge of the wheel and then slowly pry the rubber ring into the groove on the outside edge of the wheel with a slotted screwdriver. Do not apply too much force. It is so violent that the rubber ring is damaged.
4. If necessary, you can apply a few drops of glue along the grooves on the edge of the wheel to ensure a safer installation.
Please read the above carefully before use.
Specification:
Product Name: Band Saw Rubber Band
Material: rubber.
Colour: yellow.
Size: 8" x 1/2" x 0.12" (205 x 12.7 x 3 mm) (approx.)
Circumference before expansion: (approx.) 52 cm
Suitable for: 8 inch woodworking band saw wheel.
Quantity: 2 pieces.
Box contents:
2 x band saw rubber band.