[2.5mm]
[1.0 Mm]
[1.4 Mm]
[1.6 Mm]
[1.8 Mm]
[2.0 Mm]
Special features:
*
*Good performance: low spray tendency.
*Made of high quality stainless steel, which is resistant to rust and corrosion.
* Wide application: for welding corrosion resistant 0Cr19Ni9 and 0Cr19Ni11Ti, 201, 202, 301, 302, 304, corrosion resistant stainless steel structure, working temperature below 300°C.
*Use: suitable for AC and DC
Warm tips:
*The welding electrodes of 1.0 mm and 1.2 mm have strict requirements on the current of the welding machine and must be debugged slowly. Welding thin plates is not recommended for beginners and those new to welding, especially under one millimeter. The welding electrodes of 1.0 mm and 1.2 mm are too thin when welding. It will swing back and forth. Customers with rich welding experience can choose a welding electrode of 1.4 mm if they want to weld a thin plate of about 0.5 mm. Please take a look at the current range of electrode current before ordering to avoid unnecessary problems for both parties.
*The electrode before welding must be baked at 300-350℃ for 1 hour.
* Use DC as much as possible and the current should not be too large.
Technical data:
*Standard: GB / T983 E308-16 AWS A5.4 E308-16
Diameter 1.0mm, Length 250mm, Current 9-22A
Diameter 1.2mm, Length 250mm, Current 13-32A
Diameter: 1.4mm, Length: 250mm, Current: 16-40A
Diameter: 1.6mm, Length: 250mm, Current: 18-50A
Diameter: 1.8mm, Length: 250mm, Current: 20-55A
Diameter 2.0mm, Length 300mm, Current: 25-70A
Diameter 2.5mm, Length 300mm, Current: 50-90A
Diameter 3.2mm, Length 350mm, Current: 70-120A
Diameter 4.0mm, Length 350mm, Current: 90-150A
Package:20pcs
Package includes:
20 x Welding Rods