Feature

●Flexible Shaft: Ergonomic design with soft plastic pen grip makes engraving and polishing work easier
●Flexible chuck: fits directly into the chuck of any cordless or electric drill. With a flexible drive, you can move your power tool to the most inaccessible places. It can be used with polishing sets, drills, wire brushes, countersinks, lamellar grinding discs, mounted stones and grinding discs.
●【Long flexible hose】- With the 180 cm long flexible hose, you can work in tight spaces. Thickened hoses and extended wire retaining rings make the flexible shafts more robust and durable.
●Quick connection: attach your Dremel tool in seconds
●【Introduction】:42" grinder attachment, fits most rotary tools. Connector is for head with 19.05 mm thread. Works with Dremel 100, 200, 300, 3000, 4000, 7300, 7700; Foredom, ToolShop, Performax, Milwaukee M12 etc.


Description

Specifications:
Color:Black
Shaft length: 108 cm.
Connecting nut: 4 x 2 cm (L x W).
Slotted nut model: M18-M19.
Transmission Shaft: 99 x 3 cm (L x W)

"High Light
42" Rotary Grinder Flexible Flexible Shaft Fits Dremel
This is a 42" grinder attachment for most rotary tools. Connection is for head with 19.05 mm thread. Works with Dremel 100, 200, 300, 3000, 4000, 7300, 7700; Foredom, ToolShop, Performax, Milwaukee M12 etc.
If you are a DIY enthusiast, hobbyist or tradesman, turn your rotary tool into a grinder with this flexible shaft attachment. Rotary tools are incredibly versatile and this accessory gives you even more features. Besides, the flexible, non-slip shaft allows you to take control of the work in your hand.
Shaft assembly as shown in the attached image:
1) Remove the rotary tool collet and the top cap of the rotary tool.
2) Slide the collet onto the shaft core.
3) Insert the shaft core into the collet
4) Tighten collet nut. Make sure the shaft core sits firmly in the tool.
5) Screw the shaft plug onto the rotary tool. This ensures that the shaft core is pushed back into the shaft.

Bit installation instructions:
1) Insert the included L-bar into the hole on the collet side of the shaft.
2) Unscrew the shaft pliers.
3) Bit not included, in the collet
4) Tighten collet
5) Remove the L bar.

Box contents:
1 x electric shaft.