Feature

●Material: 20 rods 2.4 x 250 mm aluminium soldering are included in the package. The chemical composition of the soldering rods: Si 12%, Mg ≤ 0.10%, Fe ≤ 0.80%, Cu ≤ 0.03%, Zn ≤ 0.20%, Mn ≤ 0.15%, Rest AL. Welding powder core 18%.
●Advantages: aluminium solder soldering temperature range: 716-752 °F. Solidus: 716°F, Liquidus752°F. Tensile Strength (RM): 130N/mm² The aluminium soldering rods have good fluidity when welding, are highly caulkable and can flow into small spaces.
●Packaging: Cloud Fire welding rod packaging has been optimised and is packed in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared to other packaging. The caps at both ends can be opened for easy storage and use.
●Application: aluminium welding rods for propane burners are suitable for leak welding of aluminium ship floors, fuel tanks and capacitors. Crack repair of engine block, base, gear and aluminium alloy parts. Note: It is not suitable for welding cast iron.
●Service: If you have a problem when using the welding rod, please do not hesitate to contact us immediately. We will solve all problems for you. And we look forward to your suggestions about welding wire, we will continue to improve the products and serve you even better.


Description

aluminium solderaluminium solder

Cloud Fire low temperature aluminium welding wire can weld almost all white metals, including aluminium, suitable for leak welding of aluminium ship floors, fuel tanks and capacitors

aluminium welding wirealuminium welding wire

aluminium solderaluminium solder
Sealed tube packaging

* Sealed tube packaging can effectively reduce the occurrence of moisture and other events. The caps at both ends can be opened for easy storage and use.

* Quantity per tube: 20 EU

* Weight: 68g

* Bar length: 2.4mm x 250mm

*No soldering powder required

*Easy welding

*752℉/400℃ low temperature

Flux Core Brazing Rods

Aluminium welding wire. It has high strength, good forging and good corrosion resistance.

  • How to weld?
  • Step 1: Clean and polish the physical surface.
  • Step 2: Heat base metal to 450°C or higher for weld with heat conducting wire. No flame welding Safe sufficient surface temperature for wire flow and penetration.
  • Step 3: When repairing thin aluminum, the aluminum base metal heats up to the appropriate operating temperature and then rubs the wire back and forth to form a weld.
  • Step 4: Propane gas for small objects, industrial gas/induction heater for large objects for welding. Natural cooling after welding.

welding rodswelding rods

aluminium welding wirealuminium welding wire

aluminum soldering rodaluminum soldering rod

Aluminium soldering

Compared to the melting point of aluminum alloys, the melting point of aluminum soldering rods is low, which helps to reduce the size of the heat influenced zone and reduce the thermal impact on the workpiece when welding

High-frequency welding of aluminium

The high frequency current generates heat between the aluminium materials to increase the surface temperature of the aluminium materials, thus realizing the welding process. Aluminum high frequency welding is commonly used for welding aluminum alloy components such as aluminum pipes, containers and frames.

TIG welding of aluminium

In TIG welding of aluminium, a non-melting tungsten electrode is used to produce the arc and the welding is completed by manual addition of a suitable additive material. The weld is surrounded by an inert gas (usually argon) to prevent oxygen and other impurities from interfering with the welding process.

Product information