Feature

●The machine structure is strong and it can work with maximum diameter φ700 mm.
●This machine is designed for sharpening different types of carbide tipped saw blades from size 80 mm to 700 mm.
●Also suitable for grinding other material such as plastic, wood, aluminum alloy for various purposes such as furniture making, decoration, etc.
●The specially equipped motor has a very good running speed, which can work very well with the diamond grinding wheel.
●The direction of sharpening should be parallel with the diamond grinding wheel, it is better for grinding the rear teeth.


Description

Specifications:
Power: 250 W.
Voltage: 220 V.
Running speed: 2850 rpm.
Adjustment angle of the wheel: ± 20°.
Handle rotation angle: 30 degrees from left and 45 degrees from the right.
Sanding disc size: 4.92 inches (125 mm).
Bore size of the grinding wheel 1.26 inches (32 mm).
Item size: 72 x 43 x 30 cm.
Working method:
1. Lose the fascia, then adjust the angle of the grinding blade and fasten.
2. Center axis adjustment.
Rotate the centre axis to the sanding sheet.
Slide the centre axis to the right.
Install the saw blade, turn the wheel and decide the position of the saw teeth.
Rotate the turntable to ensure the angle of the sanding sheet.
The intersection angle between the grinding surface and the working surface is about 5.
3. Adjustment of positioning arrangement.
Adjust the saw blade to the best grinding position and rotate the positioning frame and instrument panel.
Adjust pin to the correct base of the saw teeth and leave the gap of the grinding quantity, fix the fixed screw.
4. Adjust the center axis to the same gap of the grinding quantity to the right.
5. When all parts are attached, the hand held saw blade is ground.

Safety instructions:
- Should comply with the standard voltage; we must strictly pay attention to a good ground, install residual current circuit breakers.
- The machine should be placed in a dry, clean, uniform and parallel place.
- Release the round plate and then adjust the saw blade angle.
- Check all parts that need to be locked before operation.
- Turn off the power after the end of work.
- After the machine runs well, you can start working.

Box contents:
1 set of 220 V saw blade grinder machine (250 W) (water mill)