Feature(may vary by option.)

●Function: Rewiring vintage padals or effect boxes. For unbuffered bypass / true bypass of the effects circuit without distorting the sound of the instrument or other components in the signal chain.
●Quality material: made of high temperature plastic housing; High quality internal components. Good electrical conductivity and wear resistance, electrical service life: 50,000 cycles.
●Different connection methods: there are a total of nine terminals on each switch, three per pole. 3 poles allow real bypass as well as switching a light. You can also use it as a two-pin switch by simply leaving three of the pins unoccupied.
●EASY INSTALLATION All you need is a 7/8 inch depth and a 1/2 inch diameter mounting hole. The threaded part is 7/16" high. Very practical.
●Widely Used Use for effects pedals of Electro-Harmonix, T Rex, Retro FX, Radial Bigshot, etc.Most commonly used in guitar effects pedals and audio equipment.

[Blue]

[Black]

Description

1. At least 7/8 inch depth and 1/2 inch diameter mounting hole required. The thread proportion is 7/16 large. Hex nuts, locking disc, flat washing machine included. The 9-lug switch can be used to rewire vintage padals or effect boxes, for decolouration of the bypass/real bypassing of the effect circle without colouring the tone of the instrument or other components in the signal chain. The third floor can wire A LED to a LED LED LED status light or other custom function.
3.there are a total of nine lugs on each switch, three per pole.
4. At least 7/8 inch depth and 1/2 inch diameter mounting hole are required. The threaded part is 7/16 large. Hex nuts, locking disc, flat washing machine included.
Package includes:

5 x 9-pin guitar switch