Voltage stabilised power supply for effect devices.
The power supply of effects pedals & co is often more difficult than expected. For battery-operated
Devices usually empty the batteries exactly when you do not have a replacement (the careful musician
in return has a whole drawer with half-full batteries). Or it is on stage at least
one socket less than required. With the power supplies and devices from Shaman professional power management
Simple and flexible like never before!
Shaman PS-23A.
The PS-23A consists of an AC/DC power supply and an 8-way splitter cable to power up to 8 effects.
The PS-23A delivers a rich 2000 mA at 9 volt voltage. The power supply can of course also be used without the distributor cable for
a single device. The included 3.5 mm jack adapter can be flexibly attached to any free plug.
connect.
Stabilised power distributor.
From now on, only a single socket is required to power up to 8 devices with 9 volts DC. The
DC output delivers a whopping 2000 mA! Energy-hungry effect devices also get their moneys worth here. The
Voltage-stabilised DC output delivers regardless of power consumption, i.e. even with fluctuating decrease, always the
same voltage, which keeps all connected effects at the same working point and always sound ideal.
Plug concept.
All systems have the same connector: 5mm outside diameter, 2.1mm inner diameter, negative pole inside.
Thus, you are equipped for all standard (floor) effect devices. For exotics, each set has an adapter to 3.5 mm jack
at
Professional power management from Shaman!