Specification:
Vintage pedals or effect boxes can be rewired with the item.
For unbuffered bypassing/true bypassing of the effect circuit without the tone of the instrument or other components in the signal chain.
The third pole can be wired to control an LED status light or other custom function.
With the three-pole switch, you can connect an LED for the on/off indicator if necessary, while this is not the case with the DPDT.
It is also a very hard switch that will last a very long time.
On each switch there are a total of 9 cable lugs, three per pole.
There are at least 7/8 inch depth and a mounting hole with 1/2 inch.
Diameter required The thread section is 7/16 inches.
Total length: 4.3 cm.
Box contents:
2 x effect pedal switches.