Product Name: White Aluminum Grinding Wheel / White Corundum Grinding Disc (WA)
Quantity: 1 piece
Item Weight:0.7kg
Safety multiple work description:
1. Select the grinding wheel with the spindle rotation of the grinder. Please check the grinding wheel before installation. Do not use it if cracks or damage occurs.
2. The distance between the inner hole of the grinding wheel and the spindle should not be too tight, which is generally regulated between 0.05 ~ 0.10 mm. Do not tighten too tightly when tightening the nut.
3. The protective disc used by the grinder should cover at least half the diameter of the grinding wheel.
4. After the mill has been started, it must be idle for at least 2 minutes. During idle, the operator should stand in a safe position and it is strictly prohibited to stand in front of the grinding wheel or in the tangent direction.
5. The direction of rotation of the grinder should be correct so that the grinding residue can only fly down from the grinding wheel. Grinding is done after smooth rotation of the grinder. If the mill is obvious, it should be stopped in time to tighten.
6. The initial grinding cannot be too hard to avoid uneven sanding discs and accidents. Two people must not sharpen a knife on the same grinding disc at the same time.
7. It is strictly prohibited to use side sanding to avoid crushing the grinding wheel. Do not grind copper, lead, wood and other things to prevent the grinding disc from moving.
8. The sharpening time is a long tool, should be cooled in time to avoid hot hands.
9. Regularly trim the surface compensation of the grinding wheel. Keep it properly after use, do not knock it, keep the grinding wheel dry.
10. Always wear personal protective equipment, mask, eye mask, work cap, etc.
11. Follow the instructions.