Feature

●Do not use the viewfinder for curved edges and do not hesitate to pull it, otherwise the accuracy will be affected.
●Do not turn on the spindle motor when using the photoelectric edge button.
●The photoelectric edge probe uses the photoelectric principle and the workpiece must be electrically conductive, otherwise it cannot be used. In addition, the circuit is formed by the spindle, bed and workpiece.
●When moving from one side of the workpiece to the other, the edge probe should be lifted.
●When the workpiece is in contact, the minimum distance near the workpiece should be observed to improve accuracy.


Description

Concentricity: 0.01 mm.
Specification:
Shank Diameter:20
Length: 160 cm.
Sensor diameter: 10.
Repeatability: 0.005 mm