Use:
1. Insert the signal line and transmitter into the pipeline until the signal line can no longer move. At this time, the end of the probe is the blockage position.
2. Turn on the power switch of the signal transmitter, the red indicator light lights up.
3. Turn on the signal receiver switch, and the portable signal receiver detects along the general direction of the ground pipe. When it is near the probe receiver in the tube, the horn will make a sound, and the louder the sound, the blocked point. Hold firmly, pull out the signal line first and dig out the ground to finish it.
4. If the test distance is short or the green indicator light is on, it means the battery is low. Please replace the battery. If this is a charging model, please charge it in time. The charger turns green to indicate this is fully charged and the receiver and transmitter are charged at the same time.
Specifications:
Item type: pipe clog detector
Product material: ABS
Color: as picture show
Weight: approx. 1.703 kg.
Battery parameters: Li-ion battery (included)
Transmitter battery capacity: 1800 mAh
Receiver Battery Capacity: 1120mAh
Detection distance PVC pipe: approx. 0-80 cm/0-31.5 inches.
Wall thickness: 3 mm. Iron tube: approx. 0-30 cm/0-11.8 inches.
Product function: both PVC pipes and iron pipes can be tested
Package contents:
1 x pipe plug device.
1 x hand detector.
8 x probe.
1 x USB charging cable.
8 x heat shrink tubing.
8 x probe protective covers.
8 x accessories.
Note:
Please hold the handle, turn the spool, pick up and unwind