Feature

●Ad620 - reverse polarity protection diode - devices and testing devices are not damaged in an emergency.
●Strain gauge bending test sensor - the resistance of many metals changes with mechanical bending.
●Strain gauge module - bend detection does not damage reverse polarity protection diodes, devices and test devices in an emergency.
●Load cells - reverse polarity protection diodes protect devices and test equipment from damage in an emergency.
●Strain Gauge Bend - Load Amplifier Voltage Output: Allowed Measurement Error is +/- 1-3cm. Can be used more than 10 million times, which is more than other similar products


Description

Package list:
1 x DMS bend detection test sensor module.


Features
Color: as picture show Analog DMS Amplifier
- Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The allowed measurement error is +/- 1-3 cm DC inverter.
Board size: 32 x 17 mm, electronic kits.
Material: modified phenolic substrates, strain gauges
– Additional function: test sensor module
Fatigue life: > 10 million times strain gauges
Size: 3 x 1.5 cm bending detection
Resistance: 350 ohm strain gauge kit
The analog output voltage: 0-3 gauge set.
Flux: ordinary solder resin, miniature kits.
5V strain gauges
Elongation limit: 2% amps.
Analogue output, the direct output analog signal can be read and processed directly from the next level mini amplifier.
Zero Potentiometer Test Sensor
Long fatigue life, more than 10 million times, longer than other similar miniature products.

Product Description
Bending sensor module functional principle of the resistance strain gauge is based on the strain effect that occurs when a conductor or semiconductor material is mechanically deformed under the action of external forces, the resistance value of the corresponding changes. salrayworks s-fihd- 15. The strain gauges attached to the object to be measured, so that the strain to be measured has been bent together, so that the inside of the metal film acts as a stretch on the bend. Load cells made of many metals. When mechanical bending, the resistance changes