Type ANL fuse holder for 50mm2 to 25mm2 cables with rotating connectors Features ANL main fuse block for 50mm2 to 25mm2 cables (maximum 250A) This amazingly flexible main fuse block is easy to install and is designed to protect larger power cables that feed multiple amplifiers or an entire system. Each terminal block can be rotated at five different input angles, giving you maximum flexibility in routing. This is especially handy when working with larger power cables that are difficult to handle in a crowded motor or battery compartment. OmniSert terminals accept cables of various sizes from 50mm2 to 25mm2 without the need for adapter sleeves. Forged and machined brass construction with marine grade Stannum coating. High temperature polycarbonate base and lid provide insulation and protection. Requires an ANL fuse designed for the equipment to be connected. These are sold separately. The cover must be removed (no tools required), and to pull or insert the fuse, a slotted screwdriver (or a large coin) must be used. Recommended fuse values cable cross section optimal fuse value maximum fuse value 1.5 mm2 10 A 15 A 2.5 mm2 20 A 25 A 4.0 mm2 25 A 30 A 6.0 mm2 35 A 40 A 10 mm2 50 A 60 A 16 mm2 7 00 A 80 A 20 mm² 90 A 100 A 25 mm2 100 A 125 A 35 mm2 125 A 150 A 50 mm2 160 A 200 A 70 mm2 200 A 250 A 95 mm2 250 A 30 A